Wacker Neuson DW100 Скачать руководство пользователя страница 22

Страница: 22 / 228

2-4

OM D18 us* 1.1 * Sicherheit_25022014.fm

2 Safety

2.4

Operation

Preparatory measures

•

Operation is only allowed with correctly installed and intact protective
structures.

•

Keep the machine clean. This reduces injury, accident and fire
hazards.

•

Safely store objects you carry with you in the places provided for this
(for example in the storage compartment, drinks holder).

•

Do not carry objects with you that protrude into the operator’s work
space. They can create another danger in case of an accident.

•

Observe all safety, warning and information labels.

•

Start and operate the machine only with the seat belt fastened and only
from the place provided for this.

•

Check the condition and the fastening of the seat belt. Have malfunc-
tioning seat belts and mounting hardware replaced by a Wacker
Neuson service center.

•

Before starting work, adjust the seating position so that all control
elements can be reached and fully operated.

•

Perform the personal adjustment at machine standstill only (for
example of the operator seat, steering column).

•

Ensure that all safety devices are properly installed and functional
before starting work.

•

Before starting work or after interrupting work, ensure that the brake,
steering, signaling and light systems are functional.

•

Before putting the machine into operation, ensure that nobody is in the
danger zone.

Содержание DW100





































































































































































































































Результаты поиска

Содержание DW100

Отзывы:

Похожие инструкции для DW100

Бренды по названию

Популярные бренды

Wacker Neuson DW100, Руководство оператора

Результаты поиска

Содержание DW100

Отзывы:

Похожие инструкции для DW100

Бренды по названию

Популярные бренды