Wacker Neuson BS 60-4s, Руководство оператора

Страница: 33 / 48

BS 60-4s Maintenance
wc_tx001401gb.fm
33
6 Maintenance
6.1 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated
with check marks may be performed by the operator. Tasks
designated with square bullet points require special training and
equipment.
Daily
before
starting
After
first
5 hours
Every
week
or 25
hours
Every
month
or 100
hours
Every
3 months
or 300
hours
Every
Year
Check fuel level. Check engine oil
level.
3
Inspect air filter. Replace as
needed.
3
Check oil level in sightglass.
3
Check fuel line and fittings for
cracks or leaks. Replace as
needed.
„
Tighten ramming shoe hardware.
„ „
Check external hardware.
3 3
Clean engine cooling fins.
3
Clean and check spark plug gap.
„
Change engine oil.
„
Replace spark plug.
„
Clean recoil starter.
3
Change ramming system oil.*
„
Inspect lifting cable on rammer for
wear, damage, or abuse.
3
Inspect fuel filter.
3
* Change ramming system oil after first 50 hours of operation.
Note:
If engine performance is poor, check, clean, and replace air filter elements as needed.