Wacker Neuson AS30e, Руководство оператора

Страница: 48 / 62

Maintenance
12.3 Maintenance work
48
Operator’s manual | AS | 5100056974 | 06/2020 | [us]
12.3.3 Grease ramming system
AS30e
1
1 Grease nipples
ü
Remove dirt in the area of the grease nipple 1 .
1. Place the filled grease gun on the grease nipple and actuate it ap-
prox. 20 times (approx. 30 g).
2. Wipe the area of the grease nipple with a clean cloth.
12.3.4 Check oil level and top up
NOTICE
Damage to machine due to incorrect oil level!
A too high oil level can result in a hydraulic lock in the ramming system.
This can lead to faulty operation and damage to the ramming system.
► Do not overfill the ramming system with oil.
a
b
1
ü
After transporting or storing the machine in a horizontal position, it is
necessary to let it be in an upright position for at least 15 minutes be-
fore checking the oil level.
1. Remove dirt in the area of the oil sight glass 1 .
2. Tilt the machine so that it forms a right angle b to the floor.
3. Check the oil level by using the oil sight glass.
ð
Oil level must be between ½ and ¾.
4. Add oil if the oil level is low. For oil specifications see Technical data
on page 56 .