Wacker Neuson 50Z3 Скачать руководство пользователя | Manualshive

Страница: 42 / 292

background image

2-2

BA 50Z3/6003 en – Edition 4.3 * * 5003b210.fm

Safety instructions

If the machine is no longer used according to its designated use, ensure that it is decom-
missioned or put out of operation and disposed of according to applicable regulations.

• Observe all applicable safety regulations during machine disposal.
• Machine disposal must be performed in accordance with state-of-the-art standards

that apply at the time of disposal.

2.4 Designated use and exemption from liability

• The machine is intended for:

• moving earth, gravel or rubble, for hammer operation as well as for
• working with the attachments mentioned in chapter

Fields of application

.

• Every other application is regarded as not designated for the use of the machine.

Wacker Neuson will not be liable for damage resulting from use other than mentioned
above. The user alone will bear the risk.
Designated use also includes observing the instructions set forth in the Operator’s
Manual and observing the maintenance and service conditions.

• The safety of the machine can be negatively affected by performing machine modifica-

tions without proper authority and by using spare parts, equipment, attachments and
optional equipment that have not been checked and released by Wacker
Neuson GmbH. Wacker Neuson will not be liable for damage resulting from this.

• Wacker Neuson Linz GmbH shall not be liable for injury and/or damage to property

caused by failure to observe the safety instructions and the Operator’s Manual, and by
the negligence of the duty to exercise due care when:
• handling
• Operation
• servicing and performing maintenance work and
• repairing the machine. This is also applicable in those cases in which special

attention has not been drawn to the duty to exercise due care, in the safety instruc-
tions, the Operator’s Manuals and maintenance manuals (machine/engine).

• Read and understand the Operator’s Manual before starting up, servicing or repairing

the machine. Observe all safety instructions.

• The machine may not be used for transport jobs on public roads.
• The quickhitch is only used for locking an attachment.
• Hammer operation is only allowed in specified areas.

«
...
40
41
42
43
44
...
»

Содержание 50Z3





































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 50Z3

Бренд: OLEO Страницы: 12

Бренд: Kubota Страницы: 118

Бренд: Zipper Mowers Страницы: 99

Бренд: Doosan Страницы: 894

Бренд: Meec tools Страницы: 38

Бренд: Meec tools Страницы: 39

Бренд: Forum Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды