Wacker Neuson 50Z3 Скачать руководство пользователя | Manualshive

Страница: 53 / 292

background image

BA 50Z3/6003 en – Edition 4.3 * 5003b210.fm

2-13

Safety instructions

• If an energized line is touched nevertheless:

• Do not leave the machine.
• Drive the machine out of the risk zone.
• Warn others against approaching and touching the machine.
• Have the live wire de-energized.
• The user must not touch any metallic parts.

• Do not leave the machine until the line that has been touched or damaged has been

safely de-energized.

Gas, dust, steam, smoke

• Operate the machine only on adequately ventilated premises. Before starting internal

combustion engines or operating fuel-operated heating systems on enclosed premises,
ensure that there is sufficient ventilation.
Observe the regulations in force at the respective site.

• Welding, burning and grinding work on the machine may only be performed by a

Wacker Neuson dealer.

• In areas with special hazards (toxic gases, caustic vapours, toxic environments, for

example), wear appropriate protective equipment (breathing filters, protective clothing).

Hydraulic system

• Work on the hydraulic equipment of the machine must be performed only by persons

having specific technical knowledge and experience in hydraulic systems.

• Check all lines, hoses and threaded fittings regularly for leaks and visible damage.

Repair any damage and leaks immediately. Splashed oil can cause injury and fire.

• In accordance with the Operator’s Manual/instructions for the respective assembly,

release the pressure in all system sections and pressure lines (hydraulic system) to be
opened before performing any implementing/repair work.

• Hydraulic and compressed-air lines must be laid and fitted properly. Ensure that no

connections are interchanged. The fittings, lengths and quality of the hoses must
comply with the technical requirements.

Noise

• During operation all sound baffles must be closed.
• Wear ear protectors if necessary.

Oil, grease and other chemical substances

• When handling oil, grease and other chemical substances (battery electrolyte –

sulphuric acid, for example), observe the product-related safety regulations (safety data
sheet).

• Be careful when handling hot consumables – risk of burning or scalding.
• When using the machine in contaminated areas, take appropriate measures for the

protection of the driver and the machine.

Using the quickhitches in water

• Apply grease to the lubrication points before using the Easy Lock offset bucket in water.
• After using the quickhitch in water, apply grease to the lubrication points to remove all

water.

• Using the quickhitch in salt water is prohibited.

«
...
51
52
53
54
55
...
»

Содержание 50Z3





































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 50Z3

Бренд: Takeuchi Страницы: 170

Бренд: Hyundai Страницы: 41

Бренд: VMB Страницы: 26

Бренд: Komatsu Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды