Wachs EP 424, Руководство пользователя, Страница: 70 / 122

EP 424 End Prep Machine
66 Part No. 81-MAN-00, Rev. 0-0610 E.H. Wachs
The trip assembly screws are
on the back of the ring.
Figure 5-55. Tighten down the 4 set screws while
holding the trip ring assembly in place.
Make sure the felt wiper is in
place on the back of the sin-
gle-point slide.
8.
Put the single-point slide into place on the main shaft.
Align the 3 dowel pins in the slide with the holes in
the shaft, and press the slide into place.
Figure 5-56. There are three dowel pins in the back of
the single-point slide to mount it to the main shaft.
9.
Using a 5/16” hex wrench, tighten the 6 captivated
screws in the single-point slide to secure it to the main
shaft.
NOTE
NOTE