Wachs EP 424, Руководство пользователя, Страница: 36 / 122

EP 424 End Prep Machine
32 Part No. 81-MAN-00, Rev. 0-0610 E.H. Wachs
Mounting the Universal (Standard) Mandrel
1.
Measure the I.D. of the pipe.
If the pipe I.D. is larger than
15.96” (405.4 mm), you will
need the extended leg kit.
Figure 5-1. Measure the I.D. of the pipe to determine
which leg set will be required.
See the envelope drawings in
Chapter 3 for an illustration of
the clamp leg configurations.
2.
Refer to the clamp leg chart in Table 1 to select the
correct combination of clamp legs. Find the I.D. you
measured (inches or mm) in the appropriate column
on the left, then select the leg extensions listed in the
column on the right.
NOTE
NOTE