52
14. Operational faults and the elimination of such
Operational faults
Possible cause
Remedy
Tool overheated
Tool blunt
Sharpen tool or use a new tool
Increased friction caused by
shaving build up in the tensio-
ning groove of the tool
Remove the shavings from the
hole more frequently (withdraw)
Use a coated tool
Wash the processing area with
coolant
Unsuitable tool chosen for the
material to be processed
Only use the suitable tool for the
relevant material
Tool holder cannot be removed
from the main spindle
Tool was not inserted accor-
ding to instructions
(tool screw can be unscrewed
upwards)
In the event of a remove tool
tightening screw, a suitable
and sufficiently long threaded
rod may be turned through the
spindle into the tool holder. A
blow on the end of the threaded
rod will detach the tool holder
from the main spindle. The main
spindle must be cushioned
when doing this. Otherwise the
impact will act on the spindle
bearing and may damage it. In
order to prevent damages to the
tool to be removed, use suitable
cushioning.
(See „Fitting and removing the
tools“)
Содержание CC-F1410 LF hs
