WABCO TAILGUARD, Руководство пользователя

Страница: 8 / 44

8
2.2 Summary of the safety instructions from the chapters
Observe the following safety instructions for interventions in the braking system:
„
Observe the specifications of the vehicle manufacturer.
„
Deactivation when the supply pressure is too low: Switch the system off if
the vehicle's supply pressure is too low.
„
Only intervene with the braking system if you have sufficient knowledge of
the braking system and know and can take responsibility for the effect of
your actions and all their consequences.
„
The braking system is under pressure. Before intervening with the braking
system, make sure all reservoirs and lines are pressureless.
„
With braking interventions via separately installed valves , the front axle
must not be braked. Make sure that the vehicle's front axle can NOT be
braked by the system. Braking intervention must only occur via the rear
axle(s).
To avoid any accidents, observe the following safety instructions for vehicles with braking intervention
through TailGUARD:
„
Because the stopping distance becomes longer with heavily laden vehicles
- in particular when it is equipped with EBS - the settings (parameter
setting / pressure limiting valve) must enable sufficient deceleration for the
fully laden vehicle.
„
Note pulsed braking when reversing too fast:
„
TailGUARD can assist only with reversing speeds below max. 9 km/h.
„
TailGUARD will trigger short brake pulses when a critical speed is
reached to alert the driver.
„
If the driver accelerates further, TailGUARD deactivates itself and
outputs a fault message.
„
In the case of EBS vehicles with brake intervention via separately
installed valves, ABS functions are not available during TailGUARD
braking. Even at the low speed range at which TailGUARD is active, the
wheels might lock on slippery surfaces.
„
Speed signal faults due to incorrect or unprofessional connection can
significantly impair vehicle safety.
„
Vehicles with a prepared interface for TailGUARD: TailGUARD may not
brake if the vehicle’s EBS system has a fault.
Safety information