WABCO TAILGUARD, Руководство пользователя

Страница: 38 / 44

38
Planning and performing the TailGUARD™ installation Planning and performing the TailGUARD™ installation
9 Planning and performing the TailGUARD™
installation
The installation of TailGUARD™ should be planned in advance with the aid of a checklist provided by WABCO. This
checklist can be found in Section 11.3 of the system description for TailGUARD™ for Truck & Bus.
Based on
„
the information given in the checklist,
„
informative photographs, in particular of the lifting and tipping mechanism of the respective refuse collection
vehicle,
„
as well as the measurements for the intended positions of the ultrasonic sensors,
WABCO prepares an individual set of parameters for TailGUARD™ that can be loaded into the Electronic Extension
Module using the TEBS E Diagnostic Software.
To be able to write this set of parameters to the ECU, a PIN 2 is required as access authorisation for this protected
function.
A PIN 2 authorisation can be acquired by taking the two e-learning courses
„
"Trailer EBS E" (WABCO product number: 200 300 104 0) and
„
"Trailer EBS E1 to E2" (WABCO part number: 200 300 114 0)
and completing them successfully.