28
Example:
If the three axles trailer is connected to shown
vehicle, Fig. 3 is changed to:
The display shows IVTM logo (Fig. 2) and stays without
change till the button is pressed or the defect is found.
If the defect is found on one of the vehicle wheels, symbol
of particular wheel is blinking in corresponding image
(vehicle or trailer). Depending on seriousness of defect,
control lights and audio signals are switched on.
If the defect is found on more than one wheel of vehicle
or trailer, symbols of all defect wheels are blinking.
If the defects are found in both vehicle and trailer wheels,
images of both vehicles are changing each ten seconds,
and all defect wheels are blinking.
In all cases the indicator light and audio signal
corresponding with the worst defect is switched on.
If the defect is found on one tire of double tires, the
system activates error message for both tires.
4.4.2 Pressure display
This manometer function shows the tire pressures
measured by IVTM system, and completely replaces
manual pressure measurement through tire valves.
The values are displayed after pressing left button
”manometer” in normal mode.
The axle, whose pressures are displayed, is marked.
Tire pressures on following axle could be displayed by
repeatedly pressing button ”manometer”.
If one of the axles is equipped with double tires, individual
pressures are displayed in sequence.
Display of pressure in outer tires of double tires:
The pressure of inner tires could be displayed by
repeatedly pressing button ”manometer”:
If the trailer is connected the pressure in the tires of trailer
is displayed in the same way.
After display of tire pressure in last axle and pressing the
button ”manometer” the display switches to normal
mode.
Fig. 4
IVTM
Fig. 5
IVTM
Fig. 6
IVTM
Fig. 7
bar
bar
IVTM
Fig. 8
bar
bar
IVTM
Fig. 9
bar
IVTM
bar
Diagnostics
IVTM
4.
1