18
Installation instructions
IVTM
3.
3. Mounting and connection of cable harness to the
control unit.
4. Finally: IVTM system configuration
with PC diagnostics.
3.3
Additional mounting in motor vehicle/
bus
Wheel modules are installed first.
For the front wheels
always one module with
connecting hose and
counter weight is
necessary.
The vehicle needs not to
be lifted as only four wheel
nuts are dismounted.
First connect module hose to wheel module by inserting
connecting segment to wheel module opening. Secure
the connection by turning the connecting segment. After
mounting to wheel it could not be removed.
Unscrew four nuts and
remove protecting ring.
Then mount the wheel
module and counter weight
on opposite side.
Return protection ring and
tighten wheel nuts.
Connect hose to tire valve.
For
installation to rear axle
of vehicle (in this example)
two modules for double tires for each side with one
connecting hose are needed.
Warning:
Do not use plastic valve
extension
Requirements of this
connection are fulfilled only
by metal valve extension!
First remove four wheel
nuts depending on
mounting position of
module (on opposite sides)
as well.
Diagnose-
steckdose
+2
4
V
GN
D
Br
e
m
s
lic
ht
Elektronik
(ECU)
control unit
(ECU)
b
rak
e
diagnostic
socket
light