21
Break lights wiring should be connected only in case of
vehicles with trailers, i.e. for example not for buses.
Connection provides synchronisation of signals from
trailer to motor vehicle.
Break lights cable could be connected for example
through the connector for brake pedal. Conditions of
particular vehicle may and must be taken into account.
Install display on favourable position on dashboard. Due
to audio signals it is not necessary to install display
directly in front of driver.
.
Installation instructions
IVTM
3.
Chassis
Driver cabin
Connection to
IVTM-ECU
Diagnostics-
Plug
Diagnostics
Wire
446 300 348 0
Display
WABCO
Diagnostics
Interface
446 301 021 0
connection
for PC: COM
red: +24
grey: ignition (with fuse 5A!)
blue: ground
yellow: brake light