17
3.
Installation instructions
3.1
General instructions
These installation instructions are for experts, who have
knowledge about installation of electronic and electro-
pneumatic equipment in vehicles.
It describes on examples mounting of IVTM equipment in
motor vehicle and trailer.
Respect general and special laws and regulations.
Further respect drawings in appendix and particular
technical parameters.
Warning: Work on insufficiently secured vehicle may
result in spontaneous movement of the vehicle.
Safety instructions
Respect valid regulations for work
safety and instructions of vehicle
manufacturer.
Before mounting make all necessary
safety precautions, for example secure
the car against spontaneous
movement.
Do not clean working clothes,
workplace and tools by pressure air.
Wheel nuts must be tightened with
torque specified by vehicle
manufacturer. Check tightness of
wheel nuts after 500 km.
Installation instructions
IVTM
3.
3.2
Overview
Additional mounting in motor vehicle/bus.
1. Wheel modules are installed first.
2.
Installation of the control unit to vehicle chassis.
3.
Display installation.
4.
Mounting and connection of cable harness to the
control unit and display.
5.
Finally: IVTM system configuration
with PC diagnostics.
Additional mounting in trailer
1. Wheel modules are installed first.
2. Installation of the control unit to vehicle chassis.
On three axles trailer preferentially in front of
the first axle
Di
a
g
n
o
s
e
-
st
ec
k
d
os
e
K
l. 15
, 30,
3
1
Br
e
m
sl
ic
h
t
1 Radmodul
pro Reifen
Elektronik
(ECU)
Display
bra
k
e
li
ght
d
iag
no
s
ti
c
so
ck
et
Pi
n 15
, 3
0
, 3
1
control unit
(ECU)
1 wheel module
per tyre