13
4
CAN Router
CAN Repeater
Workshop instructions
4
Workshop instructions
Prior to installation, retrofitting, or repair of the CAN router/repeater, ensure
the following instructions are observed:
– Only trained and qualified personnel may perform this work.
– Make sure to follow the specifications and instructions of the vehicle
manufacturer.
– Always comply with the company and national accident prevention guidelines and
Health and Safety regulations.
– When working on the brake system, the vehicle must be secured against rolling
away.
– Wear suitable protective clothing when necessary.
– The workplace has to be dry, as well as sufficiently lit and ventilated.
– Observe the notes for avoiding electro-static charge (see chapter 1.1 „Avoiding
electro-static charge and uncontrolled discharging (ESD)“, page 4).
4.1
Mounting and Installation
4.1.1 Installation concept
Installation diagrams for CAN routers/repeaters in the various vehicle types are
located in the appendix (see chapter 6.3 „Diagram“, page 23).
– Chose the respective installation diagram for your vehicle type.
– Identify the device and the device variant on the type plate and the designation
on the device cover label.
– Make sure that the device is suitable for the desired concept and vehicle
combination (see chapter 2.3 „System prerequisites, Configuration“, page 6).
– Choose the suitable cable and pay attention to the maximum permitted total
length of the cable for the respective connection (see chapter 3.5 „Cable“,
page 11).
connection
Maximum permitted total cable length
Z - Power IN
<18 m
X1 - Power OUT1
<80 m
X2 - Power OUT2
<15 m
1
