11
Appendix IV
113
WABCO
Maintenance Manual MM-0112 (Revised 07-18)
The final screen of the purchase process allows the details of the
purchase to be reviewed before placing the order. If all of the
information is correct, check the box acknowledging the terms and
conditions of the purchase and click Place Order. Figure 11.9.
Figure 11.9
The order will be processed, and a link to download the
configuration file will be displayed. Click the hyperlink to download
the configuration file. Figure 11.10.
NOTE:
The link will remain available for seven days. The
configuration file download must be completed in that time.
Figure 11.10
The following message will be displayed regarding the
recommended file storage location. Press OK to continue with
saving the file. Figure 11.11.
Figure 11.11
When the following screen is displayed, press Save to continue with
saving the file. Figure 11.12.
Figure 11.12
NOTE:
Save the configuration file to a location that can be accessed
while connected to the vehicle. The Aftermarket Programming
application will allow the selection of the file from any location.
Step 4: Load the configuration file into the ECU
using WABCO’s TOOLBOX™ Aftermarket
Programming application.
Begin by verifying you have the correct version of TOOLBOX™
Software. First locate the software version on the WABCO label on
the ECU. An example of the cab ECU label is shown, and the ECU
software version is circled. Figure 11.13.
Figure 11.9
Figure 11.10
4012637
a
4012638
a
Figure 11.11
Figure 11.12
401263
9a
4012640
a
0% of DownloadFile.aspx from wabcobeta.nexiq....
