Manuale d’istruzioni / Instruction manual
Rev. 10 12/2018
26
INTRODUCTION
This instruction manual gives all the necessary information for the use, the maintenance and the disposal of the appliance,
it is to be considered an integrated part of the appliance and as such must be kept and stored for further reference.
The buyer must read this hand-book for the use and the maintenance of the vacuum packing system carefully. All the
instructions and advice given in this manual must be followed as the working and maintenance of the depend on the
correct application of the following instructions.
The manufacturer declines any responsibility for damages to people, animals or things which are caused by the non-
observance of the basic safety rules and precautions, by tampering with the appliance or by the use of non original spare
parts.
MANUFACTURER
Head office
WAAGE s.r.l.
Via Casilina nord 150,800 81049 San Pietro Infine ( CE) ITALY
Tel. +39 0823 901111 / Fax. +39 0823 901321
Internet: www.waage-bilance.com e-mail: [email protected] – [email protected]
IDENTIFICATION
The instrument is identified through a plate applied on the back side, on which following you can find the following
information:
General Details:
• Name and address of the manufacturer
• Model, Registration number and CE marking
•
Tension, nominal and frequency pawer
BASIC SAFETY RULES AND PRECAUTIONS
►
Do not touch the appliance with wet or humid hands
►
Do not use the appliance when barefoot
►
If you detect any damage or the machine is not working well switch off the appliance and remove the plug from the
electricity
supply
►
Do not expose the appliance to atmospheric agents
►
Do not immerse it in water
►
Do not let children or non qualified personnel use it
►
Unplug the appliance before carrying out any operation other than vacuum packing
►
When the appliance is not in use, switch off and unplug
►
Do not pull the power cord to unplug the appliance
►
Check the level of the oil in the motor periodically, if the oil must be replaced contact an authorized service centre
►
Should you need to replace any components only use original spare parts
►
Should there be any incompatibility between your power cord and that of the factory, have it replaced by an authorized
service centre
►
Do not use non homologated adapters and / or extensions
GUARANTEE
All the products undergo severe quality tests before the manufacturer installs them and are guaranteed from any
manufacturing defectsThere is a 12 month guarantee from the selling date on the delivery document. After this period and in
the following cases the guarantee is not valid:
►
The identification plate of the appliance has been tampered with
►
The appliance has been modified without the written authorization of the manufacturer
►
The indications written in this manual have not been followed
►
The appliance has been used for functions other than those written in this manual
►
The appliance has been damaged by external factors
►
The working operations , repair or maintenance has been carried out by non qualified personnel.
ATTENTION! Is absolutely forbidden to tamper with, or to alter in any way or
to remove the plate of identification of the instrument. Don't cover it with
adhesive ribbons or other because it must always result well visible.
