Vytronix PW1500, Инструкция по эксплуатации

Страница: 5 / 14

4
•
If the power cord is damaged, it must be replaced only by Vytronix to comply
with warranty terms and conditions.
•
Do not let children or people who have not been trained in the use of a
pressure washer nor read the instruction manual operate the machine unless
properly supervised by a responsible adult.
•
Before starting up your machine please check it carefully for any defects. If
you find any, do not start up your machine and contact Vytronix immediately.
•
Hold the pressure gun and lance firmly with both hands.
•
The operator and anyone in the immediate vicinity of the site of cleaning
should take action to protect them from being struck by debris dislodged
during operation.
•
Wear goggles or other eye protection during operation.
•
Take special care when pointing at tyres and/or tyre valves as they may be
damaged by the high-pressure jet, causing them to burst.
•
This pressure washer must not be used at temperatures below 0°C.
ELECTRICAL CONNECTION
If an extension cable is used, the plug and the socket must be waterproof and comply
with the below mentioned requirements for length and cable dimensions.
•
1.0 mm² max. 12.5 m
•
1.5 mm² max. 20 m
WATER CONNECTION
•
Connection to the public mains water supply according to local regulations.
•
Inlet connection can be connected to mains water supply with a max pressure of 10
bars.
IMPORTANT!
Only use water without any impurities. If there is a risk of sand particles in the inlet
water (i.e. from your own well), an additional filter should be mounted.