11
Parameter Variable
Name Function
¾
This network variable input is used to coordinate the Space
Comfort Controller with any node that may need to control the
heat/cool changeover of the unit. This input is overridden by
nviApplicMode, unless nviApplicMode is HVAC_AUTO. If
nviApplicMode is HVAC_AUTO, then nviHeatCool determines the
effective mode of the unit.
¾
Default Null Value: HVAC_AUTO.
¾
This network variable is subject to the receive heartbeat time,
nciRcvHrtBt
¾
Valid
Range:
0 = HVAC_AUTO
1 = HVAC_HEAT
2 = HVAC_MRNG_WRMUP –
Not Used
3 = HVAC_COOL
4 = HVAC_NIGHT_PURGE –
Not Used
5 = HVAC_PRE_COOL –
Not Used
6 = HVAC_OFF
7 = HVAC_TEST –
Not Used
8 = HVAC_EMERG_HEAT –
Not Used
9 = HVAC_FAN_ONLY –
Not Used
12 = HVAC_MAX_HEAT –
Not Used
Sequence of
operation
network input
SNVT_hvac_mode
nviHeatCool
1
See note 1 below
0xFF = HVAC_NUL –
Not Used
¾
This network variable input is used to enable or disable user
access to thermostat
¾
Default Null Value: Level 0.
¾
Valid
Range:
Level Occupied
Temperature
Setpoints
System
Mode
Settings
Fan Mode
Settings
Unoccupied
Override
0
Yes access
Yes access
Yes access
Yes access
1
Yes access
Yes access
Yes access
No access
2
Yes access
No access
No access
Yes access
3
Yes access
No access
No access
No access
4
No access
No access
No access
Yes access
Remote
Lockout
network input
SNVT_count
nviRemLockout
5
No access
No access
No access
No access
¾
This network variable input is used to enable or disable
dehumidification
¾
Default Null Value: Dehumidification not allowed
¾
Set value to 100% for both On & Off state
¾
Valid
Range:
State =0 = Dehumidification not allowed
(Thermostat’s default value)
Dehumidificati
on Lockout
network input
SNVT_switch
nviDhumiLCK
State = 1 = Dehumidification allowed
¾
This network variable input is used remotely command the
Auxiliary Output (BO5).
NOTE
Auxiliary Contact configuration NEEDS to be set to 5 for this
function to operate ( 5 = Output to follow secondary network
occupancy command )
¾
Set value to 100% for both On & Off state
¾
Default Null Value: Auxiliary contact Off
¾
Valid
Range:
State = 0 = Auxiliary contact Off (Thermostat’s default value)
Auxiliary
Contact
Remote
Control
network input
SNVT_switch
nviAuxOut
State = 1 = Auxiliary contact On
