Nonvolatile Configuration
Chapter 4
GPIB-VXI User Manual
4-2
© National Instruments Corporation
Notice that some of the changes (such as the pSOS parameters) do not take effect until the
system is restarted. This can be accomplished by the pROBE commands
IN
or
BO
, by resetting
the system, or by cycling the system power.
The GPIB-VXI Nonvolatile Configuration Main Menu
When you enter the NV configuration mode, the GPIB-VXI displays the menu shown in Figure 4-1.
GPIB-VXI Nonvolatile Configuration Main Menu
(C) 1989 National Instruments
================================================
1). Read In Nonvolatile Configuration
2). Print Configuration Information
3). Change Configuration Information
4). Set Configuration to Factory Settings
5). Write Back (Save) Changes
6). Quit Configuration
Choice (1-6):
Figure 4-1. The GPIB-VXI Nonvolatile Configuration Main Menu
From the main menu, you can select the NV memory editing function you want to perform. To
select an item in the menu, enter its number at the prompt. The effect of selecting each item is
described below.
Read in Nonvolatile Configuration
The item
Read In Nonvolatile Configuration
reads the contents of the EEPROM
into RAM.
Print Configuration Information
The item
Print Configuration Information
displays the Nonvolatile Configuration
Information as shown in Figure 4-2.
