Part number 20047, Rev 0
9
CONTROL CENTER - TEMPERATURE MONITOR SYSTEM
The temperature control center (monitor) system on the front of the unit provides the
following functions-
-
to provide an indication of the sample temperature inside of the compartment
-
to provide a local alarm at the unit in the event an out of range temperature exists
-
to provide the ability to connect remote systems to provide remote alarms or
notifications in the event of an out of range temperature.
-
to provide the ability to adjust setpoints, as well as program and test other parameters
associated with the alarm system (i.e. delay times, system status).
-
a battery backup, which will maintain the alarm system for several hours after a power
failure to allow for continued alarm and notification functions.
The temperature monitor system does NOT control the temperature of the unit
. That function
is performed by the Microprocessor Digital Temperature Control, which is preset at the factory
and should not need to be adjusted by the user.
C
ONTROL
C
ENTER
P
ANEL
The LCD Display shows the temperature in ºC
In the event of a loss of power, the display shows a BAT message to indicate that the
monitor
is running on the battery. If the battery is low, the BAT message will blink.
ALARM
MUTE/PROGRAM
UP button
DOWN button
STATUS tri-color LED
ALARM/TEST button
Alarm beeper
