Part number 20047, Rev 0
7
SHELF INSTALLATON
Hook shelf clip onto pilaster strips (See below). Position all four shelf clips equal in distance
from the floor for flat shelves. Wire shelves are oriented so that cross support bars are facing
down.
Place shelves on shelf clips making sure all corners are seated properly.
TEMPERATURE CONTROL
NOTE: The controls are preset at the factory to provide the desired air and product
temperatures inside of the units and require no further adjustment. Please contact the
manufacturer’s Technical Support Department before making any adjustment to make sure
the adjustment is necessary and, if so, to ensure it is performed properly.
The Digital Microprocessor Temperature Controller is located inside the top of the refrigerator.
The operation of this controller is explained in the section starting on page 14 of this manual.
INTERIOR LIGHT (not applicable to SCLP-3004C)
The interior light is controlled by a rocker switch located on the top right in the interior of the
refrigerator.
