23
vwr.com I Instruction manual VWR® G Water System
2.4.4.4 Installing the Water Tubing
Connecting the Feed and Drain Tubing
a) Remove the stopper on the tap water inlet of the system. Take the 8 mm PE tubing from the
accessories bag and cut two pieces of the tubing with proper length.
b) Insert one end of the first 8 mm PE tubing into the water inlet of the system (Mark as
Tap
Water In
). Connect the other end to the tap water. Gently pull the tubing outward to check if
the connection is secure.
c) Insert one end of the second 8 mm PE tubing into the
RO Drain
of the system. Connect the
other end to the drain.
2.4.4.5 Installing
External Cable Connection
Tap water
UP dispenser
RO drain
HP dispenser
HP dispenser
UP dispenser
Power
EDI drain
