21
vwr.com I Instruction manual VWR® G Water System
2.4.4.4.3 Installing the Dispenser 3 (171-1275)
a)
Take out and assemble the base kit. The base is assembled differently on the left and right
sides of the crossbar. Refer to the pictures below to install the base.
b)
Open the side panels of the main system on both sides. Remove the screws as shown below.
c)
Remove the corresponding caps from the crossbar. Remove the fixed block from the cap.
Install the base on the left
side of the unit
Install the base on the right
side of the unit
Base kit
The left side of the VWR G
The right side of the VWR G
