12
• Use without eyeglasses
Raise eye shields and observe at the microscope
placing eyes to the shields, avoiding external light to
disturb the observation. (Fig. 21)
10. Microphotography
10.1 Installing the C-mount adapter
1. Loosen the clamping screw
①
on the trinocular
port and remove the dust cap
②
. (Fig. 22)
2. Screw the C-mount adapter
③
to the camera
④
and insert the round dovetail of the C-mount into
the empty hole of the trinocular port (Fig. 23),
then tighten the clamping screw
①
. (Fig. 22)
10.2 Use of reflex cameras
1.
Insert the Reflex adapter
①
into the relay tube
②
.
2.
Screw the “T2” ring
③
(not provided) to the reflex
adapter.
3.
Connect the Reflex camera
④
to the “T2” ring just
installed. (Fig. 24)
4. Install the other end of the relay tube
②
into the
microscope as already explained in chapter 10.1.
•
“T2” ring is not provided along with the microsco
-
pe, but is commercialy available.
• While shooting dark specimens, darken eyepie-
ces and viewfinder with a dark cloth to miminize
the diffused light.
•
To calculate the magnification of the camera:
objective magnification * camera magnification *
lens magnification.
• When using an SLR camera, mirror mo-
vement may cause the camera to vibrate.
We suggest lifting the mirror, using long ex
-
posure times and a remote cord.
Fig. 21
Fig. 22
Fig. 23
Fig. 24
①
②
④
③
①
②
③
④
