Instruction Manual INCU-Line Cooled
Page
43
/
50
11.1. Exterior cleaning
11.2. Interior cleaning
1.
The chamber should be emptied of any samples before cleaning.
2.
Open the door of the device and wait till the chamber has cooled down, take out the shelves and
start cleaning the device.
3.
Only water or water with mild detergent should be used.
4.
Having finished cleaning, you should allow the device to dry fully and fit all parts removed before
cleaning.
5.
During cleaning you should make sure not to damage the temperature sensor built in on the top of
the chamber.
When cleaning stainless steel product with dedicated cleaning solution, one should pay
attention to the suggestions and recommendations given in the instruction manual (or
in the safety data sheet) of the cleaning solution.
1.
The housing of the device should be cleaned at least once a week, depending on the working con-
ditions.
2.
The housing and door should be cleaned with caution using a soft cloth dampened with water.
3.
Only mild cleaning products should be used to clean the device.
4.
Electrical parts should not get in contact with water or detergent.
5.
Clean the touch screen using a soft cloth for touch screens, or it is possible to use foam for cleaning
touch screens.
6.
USB port
can be cleaned with a vacuum cleaner to prevent accumulation of dirt inside the socket.
