DETAIL A
DETAIL B
LACING POST -
QTY. DEPENDS ON
SCREEN SIZE
A
B
VUTEC CORPORATION
DRAWN BY
REVISED
DESCRIPTION
DRAWING NO.
SCALE:
REV
11711 W. SAMPLE RD. CORAL SPRINGS, FL 33065
THE INFORMATION
CONTAINED IN THIS
DRAWING IS THE SOLE
PROPERTY OF VUTEC
CORPORATION AND
REPRODUCTION IN PART
OR AS A WHOLE WITHOUT
THE WRITTEN
PERMISSION OF VUTEC
CORPORATION IS
PROHIBITED
ASSEMBLY INSTRUCTIONS
SILVERSTAR PANOFLEXX
SILVERSTAR\FLEX\
ASSEMBLYINSTRUCTIONS
NONE
--
ASSEMBLY STEP 5: INSERT AND ALIGN LACING POSTS
ASSEMBLY INSTRUCTIONS:
1.
COUNT THE NUMBER OF SCREEN GROMMETS IN THE
HORIZONTAL DIRECTION, NOT INCLUDING THE CORNERS
ALREADY SECURED BY O-RINGS.
2.
INSERT THAT NUMBER OF LACING POSTS INTO EACH OF THE
HORIZONTAL FRAME MEMBERS USING THE CENTER CUTOUT
(SEE DETAIL B). PUT THE SAME NUMBER OF LACING POSTS
ON EITHER SIDE OF THE SCREEN.
3.
POSITION THE LACING POSTS AS SHOWN IN DETAILS A AND
B. TIGHTEN USING A #2 PHILIPS SCREWDRIVER, DO NOT
OVERTORQUE.
4.
REPEAT FOR THE VERTICAL MEMBERS.
1/2"
AWAY FROM CENTER
OF SCREEN
CENTER OF SCREEN
1/2"
AWAY FROM CENTER
OF SCREEN
INSERT LACING POST ASSEMBLIES (ITEM 5)
IN THESE SLOTS, THEN SLIDE TO POSITION.
TIGHTEN THE PHILIPS HEAD SCREW TO SECURE.
PG - 8
D.TALLMAN
04/05/2019
