Vutec SILVERSTAR PANOFLEXX, Руководство по сборке

Страница: 11 / 11

SECTION A-A
CUT SECTION SHOWING
TOP BRACKET ATTACHMENT
SECTION B-B
CUT SECTION SHOWING
BOTTOM BRACKET ATTACHMENT
VUTEC CORPORATION
DRAWN BY
REVISED
DESCRIPTION DRAWING NO.
SCALE: REV
11711 W. SAMPLE RD. CORAL SPRINGS, FL 33065
THE INFORMATION
CONTAINED IN THIS
DRAWING IS THE SOLE
PROPERTY OF VUTEC
CORPORATION AND
REPRODUCTION IN PART
OR AS A WHOLE WITHOUT
THE WRITTEN
PERMISSION OF VUTEC
CORPORATION IS
PROHIBITED
ASSEMBLY STEP 8: HANG THE SCREEN
ASSEMBLY INSTRUCTIONS:
1.
LIFT THE SCREEN AND PIVOT IT TOWARD YOU TO HOOK THE
TOP FRAME MEMBER ONTO THE TOP BRACKETS. MAKE SURE
THAT THE CENTER BRACKET IS CENTERED ON THE SCREEN.
2. DO A FINAL CHECK TO ENSURE THAT THE SCREEN IS LEVEL
AND THAT THE BRACKETS ARE IN THE CORRECT POSITION.
3. PULL DOWN IN THE CENTER OF THE BOTTOM FRAME
MEMBER AND ROTATE THE SCREEN TOWARD THE WALL
UNTIL THE BOTTOM BRACKET HOOKS ONTO THE BOTTOM OF
THE FRAME.
4. TAP THE SCREEN TO TEST TENSION AND DO A VISUAL
INSPECTION OF TO CHECK FOR WRINKLES IN THE SCREEN.
5. YOUR SCREEN IS READY FOR USE.
BRACKET FITS IN FIRST SLOT.
HANG THE SCREEN ON THE
TOP BRACKETS FIRST.
PULL THIS FRAME MEMBER DOWN TO
SPRING THE FRAME, THEN SLIDE THE
SCREEN OVER THE BOTTOM BRACKET.
BOTTOM BRACKET
TOP BRACKET
ASSEMBLY INSTRUCTIONS
SILVERSTAR PANOFLEXX
--
NONE
SILVERSTAR\FLEX\
ASSEMBLYINSTRUCTIONS
D.TALLMAN
04/05/2019
PG - 11