Vulkan LOKRING HMRK-L, Инструкция по эксплуатации

Страница: 10 / 26

08 | LOKRING HAND ASSEMBLY TOOL INSTRUCTION MANUAL VERSION 1.0
F
E
C
Open and close the assembly
arm (E) until the tube connection
is correctly assembled. To
release the hand assembly tool,
completely open the assembly
arm (E) so that the pawl (C) is
not engaged in the sprocket, and
the assembly jaws have opened
again. Comment: If at assembly,
sufficient work travel of the
assembly arm (E) is not available,
the work range can be enlarged by
adjusting the holding arm (F). See
chapter 3.4 HMRK-V and MZ-V.
F
E
C
Open and close the assembly
arm (E) until the tube connection
is correctly assembled. To
release the hand assembly tool,
completely open the assembly
arm (E) so that the pawl (C) is
not engaged in the sprocket, and
the assembly jaws have opened
again. Comment: If at assembly,
sufficient work travel of the
assembly arm (E) is not available,
the work range can be enlarged by
adjusting the holding arm (F). See
chapter 3.4 HMRK-V and MZ-V.
LOKRING TYPE 50
LOKTOOL MB EVP
Place the tool on the tube
connection as shown.
Each ring of the LOKRING
connector should be assembled
separately.
3.6 ASSEMBLY OF LOKRING
CONNECTORS TYPE 50