Vulkan LOKRING HMRK-L, Инструкция по эксплуатации

Страница: 8 / 26

06 | LOKRING HAND ASSEMBLY TOOL INSTRUCTION MANUAL VERSION 1.0
Take the hand assembly tool out of its packaging. A thin film of oil has been applied to the hand
assembly tool. Remove excess oil with a lint-free cloth. Open and close the hand assembly tool
a few times to check the functionality of the hand assembly tool.
3.0 USE
3.1 BEFORE FIRST USE
The assembly jaws up to tube size ø 16 mm (5/8") are suitable for all hand assembly tools.
Larger assembly jaws can only be used in the hand assembly tools MZ or MZ-V. There are two
different types of LOKRING connectors 00 and 50:
3.2 ASSEMBLY JAWS
LOKRING TYPE 00 LOKTOOL MB
For type 00 (e.g. LOKRING 8 NK Ms 00) the assembly jaw without MB EVP designation is used
(e.g. LOKTOOL MB 8). An overview of which assembly jaw is required for which LOKRING connec-
tor is provided in the current catalog. Select the appropriate assembly jaw depending on type and
size in the current catalog and only use this jaw.
LOKRING TYPE 50 LOKTOOL MB EVP
For the LOKRING connectors type 50 (e.g. LOKRING 16 NK Ms 50) the assembly jaw with the
MB EVP designation is used (e.g. LOKTOOL MB 16 EVP).