Vulcan-Hart VTEC14, Руководство по установке и эксплуатации

Страница: 9 / 28

-
9
-
TO COMPLETELY SHUTDOWN THE BURNERS
For complete shutdown: Turn the main gas supply valve OFF. Make sure all individual
burner valves are OFF (turned completely clockwise until stops).
PREHEATING THE CHARBROILER
Allow the charbroiler to preheat for 20 minutes on the maximum (MAX) setting. Rub
grates with cooking oil before using to help reduce sticking.
LIGHTING BURNER MANUALLY
1.
Turn the main gas shut-off valve and the
individual burner control knobs to the OFF
position (clockwise until stops). Wait 5
minutes.
2. Apply a flame from an outside ignition source
(such as a lit taper, long handle lighter, etc)
directly to the gap between the bottom of the
emitter panel and the top of the intended
burner box at the front of the unit. See Fig. 7.
3. Push and turn the burner control knob to the
MAX setting (counterclockwise to vertical/90°
position) on the burner you intend to light.
(Fig. 8)
4. View through the burner sight hole (Fig.8) to
ensure the burner has lit.
5. If the burner fails to light within 4 seconds of
applying flame to the directed area, turn the
main gas shut-off valve and all burner
valves to the OFF position (clockwise until
stops). Contact an authorized service
agency.
6. Repeat steps 2-4 until all burners are lit.
Turn on one burner control knob at a time
and ensure burner is lit before proceeding
to light the next burner.
Burner Sight Hole
Burner Control Knob
Fig. 8
Cutaway View
Fig. 7
Outside Ignition Source Emitter Panel
Gap
Burner Box