Fig. 21
3.
Remove the nut at bottom of pilot to expose the
orifice.
Fig. 22
4.
Pull orifice (1, Fig. 23) out and replace.
Fig. 23
5.
Reverse procedure to install.
COMBINATION VALVE
Shut off the gas before servicing the
unit and follow lockout / tagout
procedures.
All gas joints disturbed during servicing must be
checked for leaks. Check with a soap and water
solution (bubbles). Do not use an open flame.
1.
Disconnect fryer from main gas supply.
2.
3.
Note and disconnect wires (1, Fig. 24) from
combination valve (2, Fig. 24).
Fig. 24
4.
Disconnect pilot tubing (3, Fig. 24) from
combination valve.
5.
Disconnect combination valve union and
pressure fitting.
LG Series Fryer - REMOVAL AND REPLACEMENT OF PARTS
F45691 (1117)
Page 10 of 23
