Vulcan-Hart LG Series, Руководство по обслуживанию

Страница: 5 / 23

Fig. 5
2. Reverse procedure to install.
Flue Box
1. Remove FLUE WRAP.
2. Remove screws securing flue box.
Fig. 6
3. Reverse procedure to install.
BURNERS
Shut off the gas before servicing the
unit and follow lockout / tagout
procedures.
1. Remove HEAT SHEILD.
2. Loosen mounting bolts at top of burner being
removed.
Fig. 7
3. Push up on burner while pulling bottom of burner
forward to clear burner nozzle.
4. Reverse procedure to install.
THERMOSTAT
Oil may be hot when draining fryer tank.
Shut off the gas before servicing the
unit and follow lockout / tagout
procedures.
1. DRAIN FRYER TANK .
NOTE: Steps to remove Heat Shield can be skipped
if back of fryer is accessible. Remove BACK PANEL
to access thermostat probe packing nut.
2. Remove HEAT SHIELD.
3. Remove LEFT BURNER.
4. Pull thermostat knob (1, Fig. 8) off thermostat
shaft.
LG Series Fryer - REMOVAL AND REPLACEMENT OF PARTS
Page 5 of 23 F45691 (1117)