— 4 —
ER Series Fryer — Construction Features
Model
Filter Ready
Battery
Battery
Configuration
Interplumbing
ERD40/ERC40
Opt. (Use MF50)
Opt.
Opt.
ERD50/ERC50
Opt. (Use MF50)
Opt.
Opt.
ERD225
Opt. (Use MF50)
Opt.
Opt.
ERD85/ERC85
Opt. (Use MF85)
Opt.
Opt.
Model
Fat Melt
Thermostat
Basket Lift(s)
Basket(s)
Cycle
Twin Single
Tri
ERD 225
Std.
N/A
N/A
ERD40, ERD50
Std.
Solid State
Opt.
Std.
Opt.
N/A
ERD85
Std.
Opt.
Opt.
ERC40, ERC50
Std.
Computer
Opt.
Std.
Opt.
N/A
ERC85
Std.
Opt.
Opt.
ER Series Fryer — Features
BATTERY CONFIGURATIONS
Batteries of up to five fryers wide can be configured with any ER Series Fryer or ERO Frymate Dump
Station (either 15
1
/
2
" [39 cm] or 21" [53 cm ] wide). Possible configurations showing positions A through
E are depicted below:
NOTES:
= Dump Station;
= Fryer.
*Indicates filter interplumbing not available.
A filter dump station can be located under any position in a battery if it has been built without an ERO Frymate.
A filter dump station can be located under any position in a battery if the line-up has been built with an ERO
Frymate located at either end of the battery.
When an ERO Frymate is built between two fryers within a battery, the filter dump station is located under the
ERO Frymate.
In two-unit batteries utilizing an ERO Frymate, the filter dump station will always be located under the fryer.
All options and accessories can be used with batteried equipment.
ERO15 is used on Models ER40 or ER50.
ERO21 is used on Model ER85.
