Vulcan Attachments V3GS, Руководство по эксплуатации и техническому обслуживанию

Страница: 6 / 35

5
1.3 Structure
1) SIDE ROD
The front head, cylinder and the back head of the breaker body are secured with four side
rods.
2) BACK HEAD
The gas charging valve is built in and charged with N
2
gas to improve the hammering power.
3) CONTROL VALVE
The control valve is built into the cylinder and it controls the piston‟s hammering action.
4) CYLINDER
The cylinder is the heart of the breaker body.
5) PISTON
The kinetic energy of the piston is converted into hammering energy when the piston hits the
tool; this consequently breaks the material.
6) FRONT HEAD
The front head supports the entire breaker with the thrust ring and the built in upper bushing
protects the carrier from the shock transmitted by the tool.
7) TOOL
The cone, chisel, blunt and moil tools are used for breaking different types of material.