Vulcan Attachments V3GS, Руководство по эксплуатации и техническому обслуживанию

Страница: 20 / 35

19
4.3 Disassembling and Assembling the Hammer Assembly
1) Disassembling
a. Remove the tool and set the breaker
down vertically on the floor.
b. Disconnect the hoses and plug them and
the breaker inlet and outlet ports with
clean plugs.
c. Loosen the mounting bracket bolt B, lock
washer C, and nut D to remove the
mounting bracket A from the breaker.
d. Remove the front head joint bolt E, and
washer F.
e. Remove the side brackets.
2) Assembling
a. Set the breaker down vertically on the
floor.
b. Install the side brackets.
c. Install the washer, cap nut and housing
bolts.
d. Connect the mounting bracket by
tightening the mounting bracket bolts.
e. Remove the plugs from the hoses and
connect them to the breaker‟s inlet and
outlet ports.
f. Connect the pressure and return lines.
\