9
General Operation
Initial Setup
The first time you switch the set on, the Initial setup wizard
opens, which guides you through the initial setup
process.
Perform the following steps before you press on the
remote control.
• Insert the batteries into the remote control.
• Connect the antenna cable to the TV.
• Plug in the AC cord to the AC outlet.
• Connect your TV to a network.
Make sure that the television is switched on and follow all
the steps in turn specified hereafter.
Step 1 Select your language
Use
▲/▼
to select your desired language. Press
OK
to
confirm and move to next step. (
Note
:
optional languages
may be different according to TV model.
)
Step 2 Agree the disclaimer
Use
▲/▼
to select [Agree and accept]. Press
OK
to tick.
Then press
OK
to confirm and move to next step.
Step 3 Set up the network
Android-based TV requires Internet service to access the
web and Smart TV applications. Connect Internet using
your existing wireless home network or Ethernet cable,
and follow the guides on the screen. Select [
Wireless
] or
[
Wired
] and press
OK
to proceed to the next screen. You
can also skip this step by selecting [
Skip
], and connect
to the internet later. For details, please see "Network
Connection" & "Network Setup".
Step 4 Select your country
Use
▲/▼
to select your country. Press
OK
to confirm
and move to next step. (
Note
:
optional countries may be
different according to TV model.
)
Step 5 Set up the time
Use
▲/▼
to move your cursor to the Date or Time, press
OK
to enter the submenu. Use
▲/▼
to scroll between the
numbers and select the correct date and time. Select
OK
and press
OK
to confirm and move to next step.
Step 6 All Done
When all setup is done, the
[All Done]
interface displays
on the screen, and press
OK
to finish the initial setup. You
can also go back to former step and make any changes by
using
◄ or
BACK
.
