15
Menu Operation
Channel
Select
Settings > Channel
, then the
Channel
menu
appears on the right with the following options. Press
►
to enter and use
▲/▼
to choose an option.
Channel scan
: Press
OK
/
►
to display channel scan
options.
•
Country
: Press
OK
/► to display the country list and
use ▲/▼ to select your country.
•
Tuner mode
: select
Antenna
or
Cable
option
according to your actual use.
Note
:
The
Cable
option may not be available for
certain model.
•
Automatic search
: Select
Digital & Analogue
(or
Digital
or
Analogue
), then press
OK
/
►
to start the
automatic search process. The search may take a few
minutes. During the process, you can press
OK
to
abort halfway.
•
Analogue manual scan
: Press
OK
to enter. Press
▲/▼
/
◄/►
and the number buttons or
OK
to search,
fine tune or store the channel.
•
Antenna manual installation
: Allows you to start
manual searching the available channels from the
current frequency or any frequency you input.(Only
for digital channels). Press
OK
to start search from
the current frequency, or use digit keys to input a
frequency, then press
OK
to start search. During the
process, you can press
OK
to abort halfway and press
OK
to restart, or press
BACK
to return.
•
Color system
: Allows you to select your preferred
color system among
Auto
,
PAL
,
SECAM
, and
NTSC
.
•
Sound system
: Allows you to select your preferred
sound system among
BG
,
DK
,
I
, and
M
.
Note
:
Color system
and
Sound system
are only
available under ATV source after channel scan is
finished.
Channel list
: Press
OK
/
►
to display channel list.
Channel organizer
: You can skip channels, edit
channels, or delete channels, Press
OK
/
►
to enter.
Channel skip
: If a channel is stored twice or its
reception is poor, you can simply skip it. The skipped
channels will no longer be selected by pressing the
Note
:
Some options may not be available for certain
signal sources. Some options may appear in the next
page of the
Sound
menu, you can press
▲/▼
to switch.
Sound preset
: Press
OK
/
►
to display the option list.
Use
▲/▼
to select a sound type from the list:
Standard,
Music, Movie, Clear voice
and
Personal
.
TV placement
: Use
▲/▼
to balance the sound between
Desk top
and
Wall mount
.
Auto volume control
: Select
On
mode to reduce the
annoying blasts in volume during commercial breaks
and also amplifies softer sounds in program material.
Eliminates the need to constantly adjust the volume.
SPDIF type
: Connect to an audio device through the
SPDIF output. Select
SPDIF type
and press
OK
/
►
to
display the options. Select a proper sound type from the
list for digital programs.
-
If the current program outputs sound in
Dolby
format, then either
PCM
or
Dolby
can be selected.
-
If the current program does not output sound in
Dolby
format, only
PCM
can be selected. Otherwise
no sound will be output.
Note
: The options you may choose depend on the
program you are watching. If you select
PCM
and
the sound output is ahead of the picture, you can
select
SPDIF delay
from the
Sound
menu and
press
◄/►
to adjust the delay time to synchronize
the sound with the picture.
SPDIF delay
: If the sound output does not match
the picture, press
◄/►
to adjust the delay time to
synchronize the sound with the picture.
Bluetooth audio only
: Press
OK/►
to enter. Turn on
Bluetooth
on your smart phone/pad
,
you will find the TV
set name (which is also displayed on TV screen). Select
the TV set name
, and then pair the device and the TV
according to on-screen instructions. Once paired, you
can enjoy playing the audio files from your device on
the TV. While playing, you can press
OK
on the remote
to turn the TV screen off. Press any button to turn the
screen back on.
Note
:
This option is not available for some models. For
better connection, please place your Bluetooth device
within a range of 3 meters from the TV.
Advanced settings
: Press
OK
/
►
to display its submenu.
Use
▲/▼
to select the items, such as
Balance
, to obtain
a better sound.
Note
:
The options offered depend on the program you
are watching.
