VTS Medical Systems WING C100-200, Техническая документация инструкция

Страница: 6 / 23

WING W100-200
WING E100-200
WING C100-200
6
3.2.1. HORIZONTAL INSTALLATION BY MEANS OF BRACKETS.
It is possible to install the WING do the wall horizontally in two options:
OPTION I: installation brackets with their arms faced upwards. In this option you should first screw the installation brackets to the wall (1) with intervals W1 for a 42in curtain (there are 2 installation
handles) and W1, W2 for 62in and 82in curtain (there are 3 installation handles) so that the handles' arms are levelled. Then lift the curtain and assembly with using screws (2) 1/4-UNC x 3/4 and plain
washers (3). Tighten the screws (2) and close the handle's covers (4).
W1 [in] W2 [in]
WING W, E, C100 30 -
WING W, E, C150 20 30
WING W, E, C200 36 35
OPTION II: Installation brackets with their arms faced downwards.
Installation consists in screwing brackets to the curtain (1). To mount the brackets to the curtain, with the housing upside down, punch holes (5) from the outside in the shields (4) using a hammer and a
screw. Click the shields on the brackets (1). Mount the brackets on the curtain using 1/4-UNC x 3/4 screws (2) and washers (3). This installation option allows for mounting brackets to the curtain first,
and then screwing the entire housing to the wall.
Caution !
For any of above listed installation
method, the minimum distance between
the unit and the ceiling/side walls -
minimum
4 inches .
EN