A08 - 25.09.2015
VTQ WMS HD - V/G-Mount TX
17
4.1. Starting the transmitter
When the transmitter is switched on it starts with an initialisation which automatically identifies the
video norm of the input signal. The whole process takes no longer than 6 seconds.
As soon as the initialisation is finished the display should look like the above picture.
After the start-up it takes a total of approximately 30 seconds until a solid connection between
transmitter and receiver has been established. During this start-up process, occasional picture
flickering or frame drops are possible.
If the transmitter does not auto-detect a new video format after this has been changed,
please restart the transmitter.
After switching off the transmitter, the last selected program will be saved and is displayed at the
next start.
4.2. The screen saver
To save the display while operating the screen saver will be activated 30 seconds after the last
key operation. While the screen saver is activated the displayed items rolls across the screen.
The screen saver can be stopped by pressing of any key.
4. Configuration
Configuration
HG
middle
audio
on