manualshive.com logo in svg

VTQ Videotronik WMS HD Free-Mount HG, Справочное руководство, Страница: 16 / 48

Поделиться
Скачать
VTQ Videotronik WMS HD Free-Mount HG Скачать руководство пользователя страница 16

A08 - 25.09.2015

VTQ WMS HD - V/G-Mount TX

3.4. Connectors

Please connect all peripherical hardware (antennas and cables) before switching on
the transmitter. 

1. Power / Reset

Power switch: Turn the device on or off by pressing this switch.

2. Antenna

This TNC-port provides a connection for the antenna. We recommend to operate the system with 
the antennas manufactured by VTQ Videotronik GmbH.  (please see page 1 „Accessories“)

Connector:

TNC female, 50 ohms

Please mind the frequency of the antenna, it has to match the frequency range of the
transmitter.

Do use the transmitter with attached antenna only! Never switch on the transmitter without
connecting an antenna first, else you run the risk of causing damage to the electronics.

In case you intend to operate your system according to R&TTE directive and thus without
the need to get an approval of your local/national authorities, please take into account
that, the transmission power (EIRP) may not exceed the maximum threshold value 
defined by your local/national authorities!

14

1

2

3. Connectors and control elements

Connectors and control elements

Содержание WMS HD Free-Mount HG

















































Отзывы:

Нет отзывов