VTech vt9113, Руководство по эксплуатации

Страница: 9 / 16

9
YOU HEAR NOISE IN THE HANDSET, AND NONE OF THE KEYS OR BUTTONS
WORK.
• Make sure the power cord is plugged in.
• Your Base Unit and Handset may not be operating on the same channel or security
code. Place the Handset in the cradle for a few moments to reload the security code
and reset the channel.
COMMON CURE FOR ELECTRONIC EQUIPMENT
Electronics, like people, can sometimes get confused. If the unit does not seem to be
responding normally, then try putting the Handset in the cradle to re-initialize the unit.
If it still does not seem to respond, perform the following steps (in the order listed):
1. Disconnect the power to the Base.
2. Disconnect the Handset battery pack.
3. Wait a few minutes.
4. Connect power to the Base.
5. Reconnect the Handset battery.
6. Place the Handset in the Base Unit cradle. If the Handset has not been recently charged,
allow 8 hours before use.
IN CASE OF DIFFICULTY