Configuration File Parameter Guide
145
Back to Contents
VSP725 Administrator and Provisioning Manual
"softkey" Module: Custom Soft Key Settings
The custom soft key settings allow you to select which soft keys can appear on the Idle
screen, the Call Active screen, the Call Held screen and the Live Dial screen. You can also
specify the position of each soft key. Softkeys appear on the VSP725 screen in the same
order as the softkey values you enter. Enter soft key values separated by commas. For
more information, see
“Customizing Soft Keys” on page 19
. You can specify a maximum of
nine soft keys (three levels) for each parameter.
The soft key settings follow the format softkey.[element].
All the soft key settings are included in the general configuration file.
Setting:
softkey.idle
Description:
Specifies the soft keys visible on the idle screen.
Values:
blank, dir, call_log, redial,
message, dnd, cfwd, cfna,
cfwd_all, cfwd_busy,
intercom, retrieve, callback,
grp_pickup, dir_pickup, line,
settings
Default:
dir,line,call_log
Setting:
softkey.call_active
Description:
Specifies the soft keys visible on the active call screen.
Values:
blank, new, park_call, end,
hold, transfer, conf, xferline,
confline
Default:
end,transfer,conf,xferline,
confline
Setting:
softkey.call_held
Description:
Specifies the soft keys visible on the held call screen.
Values:
blank, new, park_call,
retrieve, grp_pickup,
dir_pickup, end, resume,
transfer, conf, xferline,
confline
Default:
end,new,resume,transfer,
conf,xferline,confline
Setting:
softkey.live_dial
Description:
Specifies the soft keys visible on the live dial screen.
Values:
blank, dir, call_log, redial,
message, end, dial, input,
cancel, backspc
Default:
backspc,input,dial
