VTech VH6210 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 57

background image

44

Appendix

44

California Energy Commission battery charging
testing instructions

This wireless headset is set up to comply with the energy-conserving standards right
out of the box. These instructions are intended for California Energy Commission (CEC)
compliance testing only. When the CEC battery charging testing mode is activated, all
headset functions, except battery charging, will be disabled.

If you have registered the wireless headset to the

VH6210/VH6211

headset base, below

are the testing instructions.

To activate the CEC battery charging testing mode:

1. Unplug the headset base power adapter from the power outlet. Make sure the headset

is plugged with the charged battery before proceeding.

2. Press and hold

PAIR

on the headset base while powering up the base by plugging in

the adapter.

3. After about 20 seconds, when the blue

PHONE

light on the headset base starts

flashing, release

PAIR

and then press it again within two seconds.

The process takes up to one minute to complete. When the headset successfully enters
the CEC battery charging testing mode, the

LED light flashes slowly in red and blue.

NOTE:

When the headset fails to enter this mode, repeat all the steps mentioned above.

To deactivate the CEC battery charging testing mode:

1. Unplug the headset base power adapter from the power outlet, then plug it back in.

The headset base is powered up as normal.

2. Register the headset back to the headset base. See page 46 for headset registration

instructions.

If you have registered the wireless headset to a compatible VTech DECT cordless
telephone, please refer to the respective user's manual for the activation and deactivation
of CEC battery charging testing mode.

If you have registered the wireless headset to a telephone base that does not have CEC
battery charging testing mode, all telephone functions on the wireless headset, except
battery charging, will be disabled.

«
...
49
50
51
52
53
...
»

Содержание VH6210


























































Отзывы:

Нет отзывов

Похожие инструкции для VH6210

Бренд: Varjo Страницы: 10

Бренд: Corsair Страницы: 24

Бренд: Porta Phone Страницы: 2

Бренд: Jabra Страницы: 12

HS70 PRO WIRELESS

Бренд: Corsair Страницы: 28

EPOS IMPACT 5000 Series

Бренд: Sennheiser Страницы: 2

Бренд: Clas Ohlson Страницы: 20

Бренд: AEG Страницы: 60

Бренд: LG Страницы: 20

Бренд: LG Страницы: 10

Бренд: LG Страницы: 258

Бренд: LG Страницы: 5

Бренд: BlueTrek Страницы: 10

Бренд: Novero Страницы: 18

Бренд: Canyon Страницы: 72

Бренд: Nacon Страницы: 2

Бренд: Voxoa Страницы: 4

Бренд: Stealth Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды