0
2.6 Locating the Doorbell
Before mounting the doorbell on a wall, make sure you test if the location you
install the doorbell is in range, and adjust the camera angle to best suit your needs.
to test the location for installation:
Hold the doorbell in the location where you want to install the doorbell, then follow
the steps below to test the reception range and video capture angle.
Press
menU
→
p q
→
Settings
→
SeLect
.
Press
p q
→
Doorbell setup
→
SeLect
.
Press
/DoorBeLL
→
check video streaming quality.
Press
neXt
.
Press
ISo
→
+
/
-
→ adjust video streaming brightness.
If audio feedback occurs, press on the handset to turn off the
speakerphone.
If the desired location is in good range, the handset displays
.
If the desired location is not in good range, the handset flashes
in red.
Press
Info
for instructions to relocate your handset and/or telephone
base. When the reception is in good range, the handset displays
. Press
oK
to return to the video streaming.
6. Keep the video streaming on for camera lens adjustment.
.
.
3.
4.
5.
•
•
•