6
7
Configure your telephone
Use the handset menu
1. Press
MENU
when the phone is not in
use.
2. Press or until the screen displays
the desired feature menu.
3. Press
SELECT
.
• To return to the previous menu, press
CANCEL
.
• To return to idle mode, press and hold
CANCEL
.
Set language
The LCD language is preset to English. You
can select English, French or Spanish to be
used in all screen displays.
1. Press
MENU
when the handset is not
in use.
2. Press
q
or
p
to choose
Settings
and
then press
SELECT
twice.
3. Press
q
or
p
to choose
English
,
Français
or
Español
.
4. Press
SELECT
twice to save your
setting. You hear a confirmation tone.
Set date and time
NOTE
• Make sure you set the date and time
including the year correctly; otherwise the
answering system does not announce the
correct day of the week for your recorded
messages time stamp.
1. Press
MENU
on the handset when not
in use.
2. Press
q
or
p
to choose
Set
date/time
and then press
SELECT
.
3. Use the dialing keys (
0-9
) to enter the
month (
MM
), date (
DD
) and year (
YY
).
Then press
SELECT
.
4. Use the dialing keys (
0-9
) to enter the
hour (
HH
) and minute (
MM
). Then
press
q
or
p
to choose
AM
or
PM
.
5. Press
SELECT
to save your setting. Your
hear a confirmation tone.
Before use
After you install your telephone or power
returns following a power outage, the
handset will prompt you to set the date
and time.
Set date and time
NOTE
• Make sure you set the date and time
including the year correctly; otherwise the
answering system does not announce the
correct day of the week for your recorded
messages time stamp.
1. Use the dialing keys (
0-9
) to enter the
month (
MM
), date (
DD
) and year (
YY
).
Then press
SELECT
.
2. Use the dialing keys (
0-9
) to enter the
hour (
HH
) and minute (
MM
). Then
press
q
or
p
to choose
AM
or
PM
.
3. Press
SELECT
to save.
Check for dial tone
Press . If you hear a dial tone, the
installation is successful.
If you do not hear a dial tone:
• Make sure the installation procedures
described above are properly done.
• It may be a wiring problem. If you have
changed your telephone service to
digital service from a cable company or
a VoIP service provider, the telephone
line may need to be rewired to allow
all existing telephone jacks to work.
Contact your cable/VoIP service
provider for more information.
Operating range
This cordless telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even
so, this handset and telephone base can
communicate over only a certain distance
- which can vary with the locations of the
telephone base and handset, the weather,
and the layout of your home or office.
When the handset is out of range, the
handset displays
Out of range or no pwr
at base
.
If there is a call while the handset is out of
range, it may not ring, or if it does ring, the
call may not connect well when you press
. Move closer to the telephone base,
then press to answer the call.
If the handset moves out of range during
a telephone conversation, there may be
interference. To improve reception, move
closer to the telephone base.
