10
11
Join a call in progress (for multiple
handset models only)
You can use three handsets at a time on an
outside call.
• When a handset is already on a call,
press
on another handset to join the
call.
• To exit the call, press
OFF
on the
handset or place it in the telephone
base or charger. The call continues until
all handsets hang up.
Call waiting
When you subscribe to call waiting service
from your telephone service provider, you
hear an alert tone if there is an incoming
call while you are already on a call.
• Press
FLASH
to put the current call on
hold and take the new call.
• Press
FLASH
at any time to switch back
and forth between calls.
If you also subscribe to caller ID service, it
will let you see the name and telephone
number of the caller during call waiting.
It may be necessary to change your
telephone service to use this feature.
Contact your telephone service provide if:
• You have both caller ID and call waiting,
but as separate service (you may need
to combine these service);
• You have only caller ID service, or only
call waiting service; or
• You do not subscribe to caller ID or call
waiting services.
There are fees for caller ID services. In
addition, services may not be available in
all areas.
Chain dialing
Use this feature to initiate a dialing
sequence from numbers stored in the
directory, caller ID log or redial while you
are on a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes) from
the directory, caller ID log or redial list.
To access a number in the directory
while on a call:
1. Press
MENU/SELECT
twice to enter the
directory.
2. Press
q
or
p
to scroll to the desired
entry.
3. Press
SELECT
to dial the displayed
number.
To access a number in the caller ID log
while on a call:
1. Press
MENU
and then press
q
or
p
to
select
Caller ID log
.
2. Press
SELECT
and then press
q
or
p
to scroll to the desired entry.
3. Press
SELECT
to dial the displayed
number.
To access a number in the redial list
while on a call:
1. Press
REDIAL
.
2. Press
q
,
p
or
REDIAL
repeatedly to
browse to the desired entry.
3. Press
SELECT
to dial the displayed
number.
NOTES
• You cannot edit a directory entry while on a
call. Refer to the
Directory
section for more
details.
• You cannot copy a caller ID log entry into the
directory while on a call. Refer to the
Caller
ID log
section for more details.
• You cannot erase a redial entry while on a
call. Refer to the
Redial list
section for more
details.
• Press
CANCEL
to exit redial, directory or
caller ID log when you are on a call.
Find handset
Use this feature to find the system handset.
To start paging:
• Press
/FIND HANDSET
on the
telephone base when not in use.
All idle handsets ring and display
** Paging **
.
To end paging:
• Press
/FIND HANDSET
at the
telephone base.
-OR-
• Press
or any of the dialing keys on
the handset.
NOTES
• Press
MUTE
to turn off the ringer of a
handset temporarily. Paging tone continues
on the other handset.
• Do not press and hold
/FIND HANDSET
for more than four seconds. It may lead
to handset deregistration. If the handset
displays
To register HS
and
See manual
,
refer to the
Register a handset
section to
register the handset back to the telephone
base.
Redial list
Each handset stores the last five telephone
numbers dialed. Entries are shown in
reverse chronological order. When there
are already five entries, the oldest entry is
deleted to make room for the new entry.
Review a redial list entry
1. Press
REDIAL
when the handset is not
in use.
2. Press
q
,
p
or
REDIAL
repeatedly until
the desired entry displays.
Dial a redial list entry
1. Press
REDIAL
when the handset is not
in use.
2. Press
q
,
p
or
REDIAL
repeatedly until
the desired entry displays.
3. Press
to dial.
-OR-
1. Press
when the handset is not in
use.
2. Press
REDIAL
and then press
q
,
p
or
REDIAL
repeatedly until the desired
entry displays.
3. Press
SELECT
to dial.
Delete a redial list entry
1. Press
REDIAL
when the handset is not
in use.
2. Press
q
,
p
or
REDIAL
repeatedly to
browse to the desired entry.
3. Press
DELETE
to delete the displayed
number. You hear a confirmation tone.
