9
Getting started
Installation options
Wall mount to tabletop installation
To change the telephone base from the wall mount position to tabletop position, follow
the steps below.
1. Slide the telephone base upwards, then remove it from the wall mounting plate.
2. Unplug the telephone line cord from the telephone wall jack and the telephone base.
Untie the bundled telephone line cord. Route the telephone line cord through the
slot.
3. Put the handset aside. Hold down the switch hook on the telephone base, then slide
the handset tab upwards to remove it from the slot. Rotate the handset tab by 180
degrees. Then replace the handset tab into the slot until it locks into position.
Switch hook
Handset tab
