8
Getting started
Installation options
3. Plug one end of the telephone line cord into the
TEL LINE
jack on the back of
the telephone base. Route the telephone line cord through the slot. Bundle the
telephone line cord and secure it with a twist tie. Place the bundled telephone line
cord inside the bracket.
4. Plug the other end of the telephone line cord into a telephone wall jack.
DSL filter (not included) is required if you have DSL highspeed Internet service.
The DSL filter must be plugged into the telephone wall jack.
5. Place the telephone just above the mounting studs of the mounting plate. Slide the
telephone down until the telephone is held securely on the mounting studs. Place the
handset in the telephone base.
