www.vtdrive.com
24
Motor heat protection curve diagram (Heat state)
7. Test Run and Application
Please do some examine before test running as following:
○
If the rated power of Soft Starter is matched with the Motor
○
If the Insulation of Motor is up to the requirement
○
If the Main Circuit Connection of Input or Output is correct
○
If all the screws of terminals are twisted tightly
7.1 Set up electricity to test run
●
As soon as the soft starter is electrify , it displays the words of " CSZPU " or
“READY ", and the Ready-lamp is light, then you can press "Run" key to start.
●
Please come into FP item and input the current parameter according to the
rated current on the label of Motor
●
Having started the motor , you should examine whether the running direction
of Motor is correct ,or whether runs normally. If not, you can press "Stop" key or
